The Parweld Powered Air Purifying Respiratory System (PAPR) Adapts easily to Honeywell Pipeliner and Tigerhood welding helmets. This system will also fit your Outlaw leather hood and most other brands of pipeliner style welding helmets. The Parweld PAPR system is an easy-to-use, versatile respirator for contaminate particulate environments. With a compact and slim design, the powered air respirator is the answer to your respiratory protection needs.
Installation is quick and easy. The square holes in your welding helmet will need to be filed to slightly increase the size of the hole. The Parweld headgear with integrated PAPR duct is then installed and you are ready to go. Purchase the headgear only and adapt it to a 3M Adflo or other type of PAPR blower system or purchase the full kit for a headache free PAPR solution for your pipeliner welding hood. *welding helmet is not included.
If you are purchasing the Headgear Only for use with a 3M ADFLO blower, we recommend the XR1009 Hose as it will connect directly from the headgear to the blower. The 3M hose will need to be modified in order to connect to our headgear.
Lightweight Lightweight blower unit fits close to the user’s back, with additional shoulder straps, reducing the leverage effect that can cause PAPR’s to feel heavier. Contoured outer surface makes it less likely to snag on other objects. Lightweight lithium battery packs ensure long life and eliminate memory effect ensuring full shift operation.
Filtration The PAPR unit is fitted with a P3 Particulate main filter coupled with a carbon odour pre filter and a stainless steel spark trap to preserve the filters, all filters are replaceable. Filter lifetime is dependent upon the working environment. The unit is not suitable to operation in areas where the oxygen supply is depleted or there may be a risk of toxic gas build up.
Simple Simple, one-button control, with triple alarms – audible, LED and vibration, alert the user of the following conditions, low battery, low airflow or particle filter is blocked.
Electronic Control System Electronic control system keeps the calibrated airflow at the pre-set level and compensates for filter clogging or loss of battery charge to ensure constant air flow to the operator.
Straightforward Straightforward maintenance with the battery and filter changed in seconds by hand. The belt and blower unit have smooth outer surfaces, to limit obstruction and facilitate fast cleaning. The operator can sit or lie down without obstruction to air flow. User interface gives key operating information (fan speed, air flow, battery and filter).
•This system is TH3P certified in accordance with European standard EN12941: 1998/A 1:2004/A2:2008 TH3P
• Portable and Lightweight • Protects Against Dust Particles, Solid and Liquid Aerosols and Smoke • Constant Filtered Air Flow • Lightweight Li-ion Removable Battery • Audible, Visible and Vibration Warning Alarms for Low Power, Low Air-flow and Blocked Filter
European standard EN12941: 1998/A 1:2004/A2:2008 TH3P
-10°C to +60°C (23°F to 131°F)
-20°C to +70°C (-4°F to -158°F)
170 or 220nl/min
PROTECTION AND NOISE LEVEL
TH3 P R SL, Max. 60dB(A)
LI-ION BATTERY LIFETIME
ONE CHARGING CYCLE
OPERATING TIME OF BATTERY AFTER ONE CHARGING
1* 11h Operating time level 2* 9h (*min with a fully charged new battery & filter room temp.)