Hobart 418 E7018 H4R, E7018-1 H4R Stick Welding Electrodes
With Hobart 418 E7018 you get effortless starts with no starting porosity. Hobart 418 is ideal for tacking, increases productivity has a low moisture absorption rate and reduces potential for hydrogen cracking. The arc is very stable with low spatter, Ideal for all positions
Features
- Good wetting action
- Produces a flat bead contour; prevents cold lap and undercutting
- Easy slag removal • Quick clean-up, increases productivity
Conformances and Approvals
- AWS A5.1, E7018 H4R, E7018-1 H4R
- AWS A5.1M, E4918
- ASME SFA5.1, F-4, A-1 E7018 H4R
- ABS, 3Y H5
- CWB, E4918-1-H4
- Lloyd’s Register, BF3, 3YM, 3M
- DNV GL, 3Y H5
Applications:
- Power, petrochemical and boiler plants
- Rail cars
- Non-alloyed and fine grain steels
- Steel structures/field erections
- General fabrication/maintenance
- Heavy equipment fabrication and repair
- Shipbuilding/barge offshore drilling rigs
Type of Current: Direct Current Electrode Positive (DCEP) or AC
Recommended Welding Techniques:
-
Arc Length: Less than half the diameter of the electrode
-
Flat: Angle electrode 10° - 15° from 90°
-
Horizontal: Angle electrode slightly toward top plate
-
Vertical-Up: Use weaving technique
-
Vertical-Down: Not recommended
-
Overhead: Use slight weaving motion within puddle
-
Storage: To ensure a low hydrogen weld deposit, storage in an oven at 220°F to 350°F (104°C to 117°C) is recommended.
-
Reconditioning: If exposed to atmosphere for extended periods, the electrode should be reconditioned for one hour at 575°F (302°C).
Available Options and Part Numbers
| Diameter |
5 lb. Plastic Pak |
10 lb. Plastic Pak |
10 lb. Can (30 lb. Case) |
50 lb. Can |
| 3/32" (2.4mm) |
S119932-045 |
S119932-089 |
S119932-033 |
S119932-035 |
| 1/8" (3.2mm) |
S119944-045 |
S119944-089 |
S119944-033 |
S119944-035 |
| 5/32" (4.0mm) |
S119951-045 |
S119951-089 |
S119951-033 |
S119951-035 |
| 3/16" (4.8mm) |
- |
- |
- |
S119958-035 |
| 1/4" (6.4mm) |
- |
- |
- |
S119981-035 |
Product Data Sheet