Thermal Dynamics Cutmaster 58
April 1 - June 30, 2024 - Purchase a Cutmaster 58 and qualify for a $325 Rebate.
Rebates issued by ESAB, see esabburnandearn.ca to claim your reward.
The Cutmaster 58 is the most powerful 5/8 in. (16 mm) machine on the market today. This unit cuts through mild, stainless, or aluminum up to 1 in. (25 mm) thick. The Cutmaster 58 combines power with the well-known performance and features of the industry-leading 1Torch®.
Features
- 6.2 kW rated output, 50% Duty Cycle at 60A, available in 600V and 208-460V with automatic multi-voltage detection
- Built for portability and durability with the integral multi-handle design
- SL60QD 1Torch quick disconnect with ATC® (Advanced Torch Connector) allowing selective replacement of either the torch handle assembly or the torch leads, using the patented SureLok®technology also available as an RPT Torch
- 5/8 in. (16 mm) recommended cut capacity with greater than 1 in. (25 mm) maximum cut and 1/2 in. (13 mm) pierce rating
- Industry leading 4-year warranty on power supply and 1-year warranty on torch
Cutmaster 58 Fact Sheet (en)
Cutting Specifications
| Maximum Cut |
1 in. (25 mm) |
| Pierces |
1/2 in. (13 mm) |
| Recommended Cut |
5/8 in. (16 mm) |
Dimensions
| Height |
15 in. (381 mm) |
| Length |
24 in. (610 mm) |
| Width |
12 in. (305 mm) |
Input Ratings
Cutmaster 58 230/460V - 1-5830-1
|
|
| Frequency Hz |
50/60 Hz |
| Phase |
1/3 |
| Volts |
208-230/460 V |
(Canada)
| Cutmaster 58 600V - 1-5830-5 |
|
| Frequency Hz |
50/60 Hz |
| Phase |
3 |
| Volts |
600 V |
Operating Specifications
| Operating Temperature |
0 - 40 °C (32 - 104 °F) |
Output Ratings
| Duty Cycle |
40 % |
| Output Current AC |
60 A |
| Duty Cycle |
60 % |
| Output Current AC |
50 A |
| Duty Cycle |
100 % |
| Output Current AC |
30 A |
Plasma Gas Requirements
| Gas Flow |
402 cfh (190 l/min) |
| Gas Pressure |
48 bar (70 psi) |
Torch Requirements
| Model |
SL60QD Torch |
| Torch Air Consumption |
6.7 cfm
190 l/min |
| Torch Air Pressure |
75 psi
5.2 bar |
Weight
